20377
33
Zoom out
Zoom in
Previous page
1/110
Next page
Chapter 1 Using the Operator Panel
1-23
To use this function, the duplexer must be installed on the print-
er.
Using the optional duplexer, you can automatically print on
both sides of the paper. The duplexer is attached to the rear
of the printer. The default setting of the duplex printing is
None (duplex printing disabled).
Binding Setups
The term binding refers to the manner in which printed pag-
es of paper are joined together (by gluing, stitching, etc.) in
book form. The two possible types of binding are long-edge
binding, in which pages are joined together along their long
edge; and short-edge binding, in which they are joined to-
gether along their short edge. In selecting a binding type,
you must also consider the orientation of the printed page.
You can use long-edge or short-edge binding with either
landscape or portrait printing.
Depending on the binding type and print orientation, the du-
plexer provides four types of binding setups. These are: (1)
portrait, long-edge, (2) portrait, short edge, (3) landscape,
long-edge, and (4) landscape, short-edge. The figure below
shows these binding setups.
To select duplex printing and binding setup from the opera-
tor panel, proceed as follows.
Press the MENU key.
Press the or key repeatedly until Paper
Handling > appears.
Press the key.
Press the or key repeatedly until >Duplex
Mode appears.
Press the ENTER key. A blinking question mark (?)
appears.
Press the or key to display the desired duplex
mode. The display changes as shown below.
None (default)
Short edge bind
Long edge bind
When the desired duplex mode displayed, press the
ENTER key.
Press the MENU key. The message display returns to
Ready.
Duplex Printing
NOTE
Paper Handling >
Binding Setups
(1)
(2)
(4)
(3)
Portrait,
short-edge
Landscape,
short-edge
Portrait,
long-edge
Landscape,
long-edge
1
2
3
>Duplex Mode
None
>Duplex Mode
?None
4
5
6
7
8
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS6020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS6020 in the language / languages: English as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info