20377
21
Zoom out
Zoom in
Previous page
1/110
Next page
Chapter 1 Using the Operator Panel
1-11
• Items and values on the status page may vary depending on
the printer’s firmware version.
• The network status page will also be printed after the status
page if the option network interface card is installed. For de-
tails, see
Printing the Option Network Status Page on
page 1-12
.
1 Software Version
This information shows the firmware version and date of
issue of the printer.
2 Hardware Information
This information shows various printer settings, such as
the size and type of the paper in the paper cassettes.
3 Memory
This shows the amount of the total memory installed in
the printer, the amount of currently available memory,
and the current status of the RAM disk. See
Using the
RAM Disk on page 1-50
.
4 Page Information
This shows the print resolution, the number of copies,
and the total page count.
5 Installed Options
This shows the option(s) installed in the printer.
6 Network Status
This shows the IP address, Subnet Mask address, and
Default Gateway address for the network interface.
7 Emulation
This shows all available emulations of the printer. The
printer is shipped from the factory with the PCL 6 emu-
lation selected as the default.
8 Error Log
This shows the last three instances of the following types
of errors, listing them in the order of their occurrence:
KPDL errors; memory related errors; or memory card re-
lated errors. The most recent error is displayed on the
top line of the Error Log. For error remedies, see
Maintenance Messages on page 4-4
. The error informa-
tion is cleared when the printer’s power is turned off.
9 Toner Gauge
This shows the approximate level of the remaining toner.
When the value is 100, the toner container is full.
10 Interface Information
This information shows the default font and the default
emulation for all interfaces installed in the printer.
11 KIR Test Pattern
KIR is the Kyocera’s original smoothing function. This
test pattern shows the effect of the KIR (Kyocera Image
Refinement) system.
The service status page contains printer settings information
that is more detailed than the standard status page and is
therefore for mostly service purposes. To print a service sta-
tus page, proceed as follows;
Press the MENU key.
Press the or key repeatedly until Others > ap-
pears.
Press the key.
Press the or key repeatedly until >Service >
appears.
Press the key.
Press the or key repeatedly until >>Print
Status Page appears.
Press the ENTER key. A question mark (?) appears.
Press the ENTER key. The message display indicates
Processing and printing starts. When printing is
completed, the message display returns to Ready.
NOTE
Printing the Service Status Page
Others >
>Service >
>>Print
Status Page
>>Print
Status Page ?
1
2
3
4
5
6
7
8
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS6020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS6020 in the language / languages: English as an attachment in your email.

The manual is 4,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info