20371
69
Zoom out
Zoom in
Previous page
1/131
Next page
56
Using the Printer
Setting the Sleep Timer
The sleep timer can be set anywhere from 0 to 120 minutes in 5-minute increments.
Setting the sleep timer to 0 turns it off. The sleep timer is set at the factory to 60 minutes.
To set the sleep timer:
1
Press the MODE key on the printer panel.
2
Press the + key repeatedly until the message display indicates
Others>.
3
Press the key.
4
Press the + key repeatedly until the message display indicates
>Sleep timer.
The current sleep timer (in minutes) is indicated.
5
Press the ENTER key. The question mark (?) will appear.
6
Press the + or - key to change the timer setting. You can use the or
key to quickly change the timer setting.
7
Press the ENTER key to finalize the setting.
8
Press the MODE key to exit the mode selection menu.
Once the set time arrives, the printer will display Sleeping and all indicators will go
out. This minimizes the amount of energy used.
Note:
To have the printer enter sleep mode a set period of time after printing, press the
CANCEL key one time while the display reads Ready. The printer will enter sleep
mode after about five seconds. Note however that sleep mode will not result if the
sleep timer setting is set to 0.
Resource Protection
When you switch from the PCL 5C emulation to KPDL, all downloaded fonts and macros
are lost. Resource protection preserves these PCL resources in memory so that they are
intact when you change the emulation back to PCL 5C.
By using the printer’s >Resource prot.menu, you can select from two resource
protection modes:
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS5800C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS5800C in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info