20371

Kyocera FS5800C Manual

65
Zoom out
Zoom in
Previous page
1/131
Next page
52
Using the Printer
■ Reading Data from a Memory Card
The operation described here is performed while the message display reads Ready.
1
Insert the memory card into the memory card slot (☞ P. 51).
2
Bring up the menu that reads the data you want to read in on the
message display. For example, if you want to read the font data,
select >Read data.
For details on using the mode selection menu, see pages 37 and 44.
3
Press the ENTER key. The question mark (?) will appear and a data
name will appear after it.
Press the CANCEL key to abandon reading data.
4
Press the + key to scroll through data names on the memory card.
5
Press the ENTER key again. This will cause Processing to appear
in the message display and the selected data will be read.
6
After the data have been read, the message display will return to
Ready.
■ Writing Data (Partitions) to a Memory Card
Up to 127 partitions can be written on a single memory card. Data written on the card
are automatically assigned names, which can be checked by printing out a partition list.
Check that the memory card is not write-protected.
1
Bring up the menu >Write data on the message display.
2
Press the ENTER key. ? will appear.
3
Pressing the ENTER key again will cause Processing to appear in
the message display followed by Waiting.
Press the CANCEL key to cancel writing data.
4
Send data from the computer to the printer.
[Example]
Sending the file TEST.PRN to the printer from the computer (DOS mode).
COPY TEST.PRN LPT1
The message display will change to Processing when data is received and will
change back to Waiting when reception is finished.
Note:
A printable file should be stored on the memory card.
… 65 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS5800C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS5800C in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info