20371
51
Zoom out
Zoom in
Previous page
1/131
Next page
38
Using the Printer
Outline for Menus
Interface menu
The Interface menu selects one of the three printer interfaces (Option is available only if
an option network interface card is installed) on which subsequent mode menu settings
become effective. The Parallel and Serial options have the second level menus as
described below.
Level 1 Level 2 Range
Interface > >Parallel I/F Auto
Normal
High speed
Nibble (high)
Level 3 Range (*=Default)
>Serial >Baud rate 1200, 2400, 4800, 9600*, 19200,
38400, 57600, 115200
>Data bits 7 or 8*
>Stop bits 1* or 2
>Parity None*, Odd, Eve, Ignore
>Protocol DTR (pos.) & XON*, DTR
(positive), DTR (negative),
XON/XOFF, ETX/ACK
>Barcode mode Off* and On
>Option
Available only when the optional harddisk is installed in the printer.
Parallel Interface Mode
The parallel interface mode of this printer supports a bi-directional/high-speed mode.
Display Description
Nibble (high) The parallel interface is in high-speed/bi-directional mode in com-
pliace with the IEEE1284 standard (Default).
Auto The printer automatically changes its communication mode to the
one the host computer is using.
Normal The parallel interface is configured according to standard specifi-
cations. Use this setting when conventional timing must be used.
High speed The parallel interface is in high-speed mode.
After setting the interface, be sure to reset the printer or turn the power off at least once.
The new setting will be enabled thereafter.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS5800C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS5800C in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info