20353
42
Zoom out
Zoom in
Previous page
1/124
Next page
1.7. Memory Expansion Installation
1-23
1.7. Memory Expansion Installation
In this section is explained how to expand the printer's memory. Expanded printer memory enables you to
print more complex pages, download more fonts, and define more macros.
It begins by explaining how to remove the main circuit board from the printer, and explains how to install a
SIMM (single in-line memory module) on the main circuit board.
The FS-1750 comes supplied with 8 MB of memory installed, and likewise the FS-3750 comes with 16 MB of
memory supplied. Two slots are provided for expanding the memory in your printer so that more complex
printing can be done, as well as increasing the printing speed. By installing the optional memory card into
your printer, the memory in the FS-1750 can be increased to a maximum of 72 MB, and the FS-3750 can be
increased to a maximum of 64 MB.
A 16 MB SIMM is installed in one of the SIMM sockets in the FS-3750, so in order to increase the
memory to the maximum 64 MB this SIMM must be changed.
The expansion memory should be installed only by a Kyocera authorized dealer or Kyocera certi-
fied technician. Kyocera shall not be liable for damage due to improper installation of the expan-
sion memory.
The minimum memory requirements for the printer with various options installed are listed in the table
below. Please refer to this table when expanding the printer's memory.
Removing the Main Circuit Board
The main circuit board of the printer is equipped with two sockets for memory expansion. Expansion mem-
ory is available in the form of a SIMM.
The following instructions are intended for the technician only.
Notes on Handling the Main Circuit Board and SIMM
Protect the electronics by taking these precautions:
Before touching the main circuit board, touch a water pipe or other large metal object to discharge yourself
of static electricity. While doing the work, it is recommended that you wear an antistatic wrist strap.
Touch the main circuit board and SIMM only by the edges.
Printing condition
Resolution
300 dpi 600 dpi
1200 dpi
Fast mode Fine mode
PCL 6, duplex mode = None 8 MB 8 MB 8 MB 8 MB
PCL 6, duplex mode = On 8 MB 8 MB 8 MB 12 MB
KPDL, duplex mode = None 8 MB 8 MB 8 MB 8 MB
KPDL, duplex mode = On 8 MB 8 MB 12 MB 12 MB
PCL 6/KPDL resource protection,
duplex mode = None
10 MB 10 MB 10 MB
PCL 6/KPDL, resource protection,
duplex mode = On
14 MB 14 MB 14 MB
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS3750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS3750 in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info