20333
19
Zoom out
Zoom in
Previous page
1/282
Next page
Understanding the Operator Panel
1-5
Keys
The operator panel keys are used to
configure the printer. Note the
certain keys have the secondary
function.
Settings made with these keys effect only the interface currently in use.
GO
CANCEL MENU ENTER
?
Note
Key Function
Switches the printer on-line and off-line.
Prints and feed out one page.
Cancels a printing job.
To cancel, proceed as follows:
1 Check if
Processing
is displayed in the message display.
2 Press the
CANCEL
key.
3
Print Cancel?
appears in the message display and then interface to be canceled.
Parallel
Serial
Option
(appears only when an option network interface card is installed)
Press the
CANCEL
key again if you wish to stop the cancellation of printing.
4 Select the interface to cancel using the or key and then press the
ENTER
key.
Printing from the selected interface will stop.
Cancelling data
appears in the message
display and printing stops after the current page is printed.
Resets numeric values, or cancels a setting procedure.
Used to stop the sounding of the alarm buzzer an error occurs.
When pressed during mode selection, terminates the setting and the printer returns to the
Ready
condition.
Used to select the emulation, font, character code set; to read an CompactFlash card, and
more.
Used to access a desired item or enter numeric values. In some of the control procedures, the
<
and > keys are used to enter or exit a sub item.
Used to access a desired item or enter of numeric values. In some of the control procedures, the
< and > keys are used to enter or exit a sub item.
Used as the < key in the mode selection function.
Used as the > key in the mode selection function.
Displays online help messages on the message display when paper jam errors occur. When
pressed in the
Ready
condition, displays explanations of online help messages. When pressed
while the online help is displayed, cancels the online help.
Finalizes numeric values and other selections.
GO
CANCEL
MENU
?
ENTER
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS1800 in the language / languages: English as an attachment in your email.

The manual is 6,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info