20337
124
Zoom out
Zoom in
Previous page
1/124
Next page
*1: Depending on the emulation selected, the following set
!&RGHýVHWV are available.
*2: The printer can be set to print error data during KPDL emula-
tion. If this is set toý2Q , error data will be printed if trouble
occurs during printing. This is set toý2II before leaving the
factory.
*3: You can select either Courier or Letter Gothic. Any font can
be selected asý'DUN orý5HJXODU. These fonts are dis-
played when the Font menu is Internal.
*4: Theý!6L]H menu is not available for the Courier and Let-
ter-Gothic fonts. Theý!3LWFK menu is displayed instead
for these fixed width fonts.
*5: Althoughý$XWR is the default setting and this menu does
not usually appear, page protection mode will be forcibly set
to on if aý3ULQWýRYHUUXQý3UHVVý&217,18(
error occurs due to insufficient printer memory. Be sure to
return this setting toý$XWR in order to maintain high printer
memory efficiency.
*6: Turning this toý2 1 increases the maximum number of char-
acters that can be printed in a line for an A4 page (78 char-
acters at 10 pitch) and likewise increases the maximum per
line on Letter size paper (80 characters at 10 pitch).(Only PCL
6 emulation)
*7: This sets the resolution for printing. For 1200 dpi there are
two modes. In Fast 1200 mode, printing is equal to 1200 dpi
(1200 dpi horizontal × 600 dpi vertical) comparatively, Fine
1200 mode is slower, but in Fine 1200 mode true1200 dpi
printing is facilitated. The printing is slower than Fast mode
but the print quality is better.
*8: This is displayed only after the FS-1750 memory has been
expanded. (The total must be 12 MB or more)
*9: This is displayed when the size dial on the paper cassette is
set to Custom. (See section 2.7. Setting Custom Sizes.)
*10:This sets whether to enable or disable the difference between
A4 size and letter size. Under the default setting ofý2II, the
paper size of the paper source is matched to the paper size
given for the data, and if these differ a corresponding error
message is displayed. When this is set toý2 Q , printing is per-
formed even if the actual paper size differs from the paper
size given for the data.
*11:This menu is displayed only whený&XVWRPýú is selected.
*12:After the printer accepts all data and there is no more data
from the computer, the printer will wait a set amount of time
without printing the final page. Once this preset amount of
time has elapsed, the printer will automatically issue a form
feed. This timeout setting can be set in 5-second increments
up to 495 seconds.
*13:This is the total number of pages printed by the printer up to
the present time.
*14:These menus are for service personnel.
They should not be operated by the user.
ý
!5HVRXUFHý SURWï
ýý3HUPýîý7HPS
ý
Continued from Previous page
ý
2WKHUVýýýýýýýýýýý!
ý
!)RUPý )HHG
ý 7LP 2X íêíý VH
ý
!06*ý ODQJXDJH
ý ý (QJOLVK
(*12)
ý
!6OHHSý WLPHU
ýýýýýýýýýýíêíýPLQï
ý
!3ULQWý +(;ð'803
ý
!3ULQWHUý 5HVHW
ý
!1XPEH RIý SDJHV
ý SULQWHGý íìëêéèç
ý
!5HVRXUFHý SURWï
ý ý 3HUPDQHQW
ý
!5HVRXUFHý SURWï
ýý2II
ý
!%X]]HU
ýý2II
ý
!%X]]HU
ýý2Q
ý
!6HUYLFHýýýýýýýýý!
ý
!!'HYHORSHU
ý
!!3ULQW
ý 6WDWXVý 3DJH
ý
!!'UXP
(*14)
(*13)
124


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS1750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS1750 in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info