20331
153
Zoom out
Zoom in
Previous page
1/165
Next page
RS-232C Interface Voltage Levels
The voltage levels of the interface signals conform to EIA RS-232C specifications. SPACE is
from 3 volts to 15 volts. MARK is from -3 volts to -15 volts. Voltages between -3 volts and 3
volts are undefined.
RS-422A interface
The serial interface of this printer was set to RS-232C mode before leaving the factory. How-
ever, by changing the jumper connector on the main circuit board, the interface can be
changed to RS-422A mode.
In RS-232C mode
, the printer can be connected to a personal computer (or similar de-
vice) equipped with an RS-232C serial interface. (The serial interface is set to RS-232C be-
fore leaving the factory.)
In RS-422A mode
, the printer can be connected to a personal computer (or similar de-
vice) equipped with an RS-422A serial interface.
The changing of the main circuit board jumper connector should be carried
out only by a Kyocera authorized dealer or Kyocera certified technician. Kyo-
cera shall not be liable for damage due to improper changing of this main cir-
cuit board jumper connector.
Removing the Main Circuit Board
The following instructions are intended for the technician only.
Notes on Handling the Main Circuit Board
Protect the electronics by taking these precautions:
Before touching the main circuit board, touch a water pipe or other large metal object
to discharge yourself of static electricity. While doing the work, it is recommended
that you wear an antistatic wrist strap.
Touch the main circuit board only by the edge.
C.2. RS-232C/RS-422A Interface
C-6
153


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS1700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS1700 in the language / languages: English as an attachment in your email.

The manual is 11,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info