20329
144
Zoom out
Zoom in
Previous page
1/154
Next page
C.2. RS-232C/RS-422A Interface
C-8
Verifying the Setting
The procedure described below should be followed to verify that the RS-422A mode had been cor-
rectly set. Print the service status page to verify that the RS-422A mode has been correctly set.
1. Make sure the power switch is off. Plug the power cord into the printer and turn power on.
2. If the printer is on-line, select    in the Mode Select menu (refer
to Mode Select Menu at the end of this document), and print the service status page.
3. Verify whether the setting is correct by checking the status printed at the bottom of the page.
The following sample indicates that "RS-422A" is set "RS4". If "RS-232C" is set, "RS2" appears.
Interface Signals
The pins in the printer's RS-422A interface connector carry the signals listed in Table C.3.
Overview of Signals (RS-422A)
FG - Frame Ground - (Pin 1)
This pin is connected directly to the printer frame.
SG - Signal Ground - (Pin 7)
All signals can transmit between the printer and the host computer to send each signals with a
signal ground.
Table C.3. RS-422A Signal Pin Assignments
Pin In/out Signal Description
1–FG
Frame ground
3InRDA
Receive data Inverted
7–SG
Signal ground
9OutSDA
Send data Inverted
10 Out SDB
Send data
18 In RDB
Receive data
[Printer Status Page]
Indicates the current serial
interface mode.
144


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS1700+ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS1700+ in the language / languages: English as an attachment in your email.

The manual is 5,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info