20319
79
Zoom out
Zoom in
Previous page
1/150
Next page
General Guide for Troubleshooting
3-2
3.1 General Guide for Troubleshooting
There are quite a few printer problems which may be corrected by the user.
If some kind of printer problem should occur, check the following before
concluding the printer is broken.
This section explains how to correct these problems.
If you still cannot correct a printer problem even after checking the above,
please contact your Kyocera Mita dealer.
Symptom Check Items Corrective Action
The printer will not
print from the
computer.
Check the indicator. Off Look through the items below and check
anything that seems appropriate.
Flashing Rapid flashing: An error has occurred. For
details on error warnings and remedies, see
section 3.3 Indicators on page 3-6.
Flickering: The printer is offline. Pressing the
key switches the printer to online status.
Lit See the appropriate item below.
Check if status page can
be printed.
Status page
can be
printed.
There may be a problem with the computer’s
connection to the network. Also, look through
the items below and check anything that
seems relevant.
Print quality is not good. See section 3.2 Print Quality Problems on
page 3-3.
Paper is jammed. See section 3.4 Paper Jam Removal on page
3-15.
Nothing lights on the
operator panel even
when power is turned
on and the fan makes
no noise.
Check that the power cord is properly
plugged into the power outlet.
Turn off the printer’s power, plug in the power
cord securely, and try turning on the printer’s
power again.
Check that the power switch is really in the ON ( | ) position.
The printer prints a
status page, but data
from the computer is
not being printed
normally.
Check the interface cable. Connect both ends of the interface cable
securely. Try replacing the printer cable. For
details on the parallel interface for this
printer, see Appendix B.
Check program files and application
software.
Try printing another file or using another
print command. If the problem occurs only
with a specific file or application, check the
printer settings for that application.
Table 3-1
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS1020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS1020 in the language / languages: English as an attachment in your email.

The manual is 5,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info