20207
117
Zoom out
Zoom in
Previous page
1/182
Next page
Print Quality Problems
4-4
Faint or blurred printing Check the EcoPrint setting.
Check the EcoPrint setting. Check the EcoPrint setting.
Check the EcoPrint setting. (See
Chapter 1
Chapter 1Chapter 1
Chapter 1
)
When this setting is On, switch it to Off on the Remote
Operation Panel. (See
Chapter 1
Chapter 1Chapter 1
Chapter 1
)
Confirm the (toner) indicator.
Confirm the (toner) indicator.Confirm the (toner) indicator.
Confirm the (toner) indicator.
If the (toner) indicator flashes, install a new toner
kit. (See
Chapter 3
Chapter 3Chapter 3
Chapter 3
)
Clean the charger wire.
Clean the charger wire.Clean the charger wire.
Clean the charger wire.
Open the printer’s top and front covers. Remove the
process unit from the printer and slide the charger knob
back and forth to clean the charger wire.
(See
Chapter 3
Chapter 3Chapter 3
Chapter 3
)
Try setting the thin paper mode.
Try setting the thin paper mode.Try setting the thin paper mode.
Try setting the thin paper mode.
Set the paper type to Thin in the Remote Operation
Panel utility. (See
Chapter 1
Chapter 1Chapter 1
Chapter 1
)
Grey background. Check the operator panel.
Check the operator panel.Check the operator panel.
Check the operator panel.
When the (toner) indicator flashes, install a new
toner kit. (See
Chapter 3
Chapter 3Chapter 3
Chapter 3
)
Check the process unit.
Check the process unit.Check the process unit.
Check the process unit.
Open the printer’s top cover and front cover, then check
that the process unit is properly installed.
Dirt on the top edge or back of the paper Check the transfer roller.
Check the transfer roller.Check the transfer roller.
Check the transfer roller.
Open the printer’s top and front covers. Remove the
process unit from the printer and check whether the
transfer roller is dirty. If so, print several pages to
eliminate the dirt.
Check the registration roller.
Check the registration roller.Check the registration roller.
Check the registration roller.
Open the printer’s top and front covers. Remove the
process unit from the printer and check whether the
registration roller is soiled with toner. If so, wipe it clean
using the supplied wiper cloth.
Characters out of position. Check the file or program.
Check the file or program.Check the file or program.
Check the file or program.
Check whether the problem is being caused by a
PRESCRIBE command error. If the problem occurs only
with a specific file or program, the most likely cause is an
error in a parameter to a command or command syntax.
Check the paper size setting.
Check the paper size setting.Check the paper size setting.
Check the paper size setting.
Check that the paper size set in the paper source and the
paper size set on the Remote Operation Panel are the
same. (See section
1.4.4
1.4.4 1.4.4
1.4.4 Paper Size
Paper SizePaper Size
Paper Size
on page
1-20
1-20 1-20
1-20
and
Chapter 5
Chapter 5Chapter 5
Chapter 5
)
Printed Results Corrective Action
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS1010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS1010 in the language / languages: English as an attachment in your email.

The manual is 7,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kyocera FS1010

Kyocera FS1010 User Manual - German - 24 pages

Kyocera FS1010 Installation Guide - Dutch - 24 pages

Kyocera FS1010 User Manual - French - 24 pages

Kyocera FS1010 User Manual - Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info