20209
131
Zoom out
Zoom in
Previous page
1/136
Next page
Glossary
E-2
Cassette mode
This is an operation mode for the MP tray. When
this mode is used, approximately 50 sheets of
plain paper can be fed continuously, the same as
for the cassette.
dpi (dots per inch)
This indicates the number of dots printed per
inch, and is the unit of printer resolution.
Ecoprint
This is a printing mode that controls toner
consumption. Pages printed in the Ecoprint mode
are lighter than pages printed in the normal
mode. The default setting is Off.
Emulation
This refers to emulation of manufacturers'
printers. The
FS-1000
emulates operation of the
following printers: PCL, Line printer, IBM
Proprinter, DIABLO 630, EPSON LQ-850,
KPDL2 (option).
Expansion memory
This option is used to increase printer memory.
The
FS-1000
has one expansion slot, and you can
install a 16 MB, 32 MB, 64 MB, or 128 MB
DIMM (Dual Inline Memory Module). See your
Kyocera dealer to purchase the DIMM that is
best suited for use with this printer.
Face-up tray
This is located at the rear of the printer. Select
paper output to the face-up tray when printing
on postcards, envelopes, or labels.
First mode
This is an operation mode for the MP tray.
Because the MP tray default setting is set to first
mode (priority printing from the MP tray), if
there is paper inserted in the MP tray, the first
paper will always feed from there even if another
paper source is selected. First mode is specified
as the factory default, but you can change this
setting from the
Remote Operation Panel
.
IEEE1284
This is a standard used when connecting a
printer to a computer, and was established by the
Institute of Electrical and Electronic Engineers
in 1994.
KIR (Kyocera Image Refinement)
This is Kyocera's original smoothing function. It
uses software to enhance the printer's resolution
and produce high-quality printing. The default
setting is Off.
KPDL2
(Kyocera Printer Description
Language 2)
This is Kyocera's version of Adobe PostScript 2.
To use this, the
KPDL2 Upgrade Kit
(
PK-6
) must
be installed on your printer.
Kyocera Digital Library
This is contained on the CD-ROM supplied with
the printer. The contents of the CD-ROM include
manuals, printer drivers, and various utilities.
Kyocera PrintMonitor
This is a network management tool that can be
used with the Kyocera FS series. You can view
information for printers connected to the
network using SNMP commands.
Kyocera
PrintMonitor
is contained on the
Kyocera Digital
Library
CD-ROM supplied with the printer.
131


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera FS1000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera FS1000 in the language / languages: English as an attachment in your email.

The manual is 3,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info