495639
12
Zoom out
Zoom in
Previous page
1/186
Next page
Introduction Getting Ready
Taking Pictures
Playback Set Up
GB-12
What Your Camera Can Do
|
Nomenclature
|
Names of the menus and icons shown on the screen
|
LED display
|
FCC
Compliance Statement for American Users
|
Handling Precautions
NEXTBACK
Contents (Top page) Detailed Contents Index Nomenclature Menus and Settings Troubleshooting
F
CAUTION
Do not direct the camera lens directly toward the sun when shooting, since the
CCD element may be damaged.
Clean the camera well after using it at the beach or other locations subject to
large concentrations of sand or dust. Salt air may promote corrosion of metal
components and damage or short circuits in electronic parts, causing the
camera to emit smoke or catch fire. Sand inside the camera may result in
internal damage and operating malfunctions.
If the camera is brought quickly from a cold place to a warm room,
condensation may form on the lens and internal parts. Such condensation
may result in damage or short circuits in electronic parts, causing the camera
to emit smoke or catch fire. Whenever possible, avoid subjecting the camera
to sudden changes in temperature.
When taking the camera overseas or using it to record
important events, check its operating condition and take test
pictures beforehand to confirm proper operation.
This camera is a precision electronic instrument, and should be protected
from impacts and falls that might cause damage to internal parts or the
emitting smoke and ignition by the shorting of circuitry.
This camera is an electronic device which uses a high-performance IC. During
use, the camera may grow warm due to heat emitted by IC. While this is
normal, note that holding the camera for long periods risks low temperature
burns.
This camera is not designed to be waterproof, and cannot be used in the rain
or under water. If the camera should inadvertently be exposed to water, it
should be taken quickly to a Kyocera/Yashica Service Center for inspection.
Take great care to keep the photography lens and light sensor clean since
soiling such as fingerprints can affect the accuracy of the camera's metering
and focusing functions. If these areas become soiled and require cleaning,
wipe them gently with a third-party lens cleaning cloth. Any dust should be
removed using a blower or lens brush.
Clean the camera body by wiping with soft cloth. Never use benzene, thinner,
or other volatile solvents or cleansers, since such substances will damage the
body materials.
Do not remove the SD memory card or MultiMedia Card (MMC) while the card
access LED is flashing (e.g. immediately after photography or playback).
Interference may occur in recorded or played back images when the camera
is used in areas subject to strong electromagnetic interference (e.g., near a
television set or stereo speakers).
If the camera is dropped, it may be damaged internally or parts may have
been dislodged even when there is no visible external damage. The camera
must be taken to a Kyocera/Yashica Service Center for checking.
Do not attempt to touch the insides of the memory card slot, since damage or
malfunction may result.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera Finecam M400R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera Finecam M400R in the language / languages: English as an attachment in your email.

The manual is 8,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info