288536
9
Zoom out
Zoom in
Previous page
1/134
Next page
9
Introduction
Clean the camera body by wiping with soft cloth. Never use benzene, thinner, or other
volatile solvents or cleansers, since such substances will damage the body materials.
Do not remove the SD memory card or Multi-Media Card (MMC) while the card access
LED is flashing.
Interference may occur in recorded or played back images when the camera is used in
areas subject to strong electromagnetic interference (e.g., near a television set or stereo
speakers).
Do not direct the camera lens directly toward the sun when shooting, since the CCD
element may be damaged.
If the camera is dropped, it may be damaged internally or parts may have been dislodged
even when there is no visible external damage. The camera must be taken to a Kyocera/
Yashica Service Center for checking.
Do not attempt to touch the insides of the memory card slot, since damage or malfunction
may result.
<Microcomputer Protection Circuit>
<Storing the Camera>
Do not place the camera in places that may be exposed to high temperatures for extended
periods of time (the beach in summer, a closed car under bright sun, etc.). Such high
temperatures may cause adverse affects or damage to the camera, batteries, or memory cards.
Remove the battery pack before storing the camera for extended periods of time, to prevent
battery leakage and resulting damage.
<LCD Monitor>
Due to the innate characteristics of LCD panels, a few pixels may appear permanently lighted or
may not light at all. This is not a malfunction, and does not affect the recorded image in any
way.
For best performance, we recommend the use of genuine Kyocera accessories. Kyocera is not
responsible for any accidents or damage caused by the use of accessories made by other
manufacturers or fashioned by the user.
This camera incorporates a safety circuit to protect its microcomputer against strong external
static electricity. Though rare, it may fail to function because this safety circuit has come into
action.
In this case, turn off the camera’s power, remove the batteries, reload them and use the camera
again.
a
CAUTION
Store the camera in a well-ventilated location, avoiding damp or dusty areas,
drawers or boxes containing mothballs, or in laboratories or other locations
where chemicals are handled. Exposure to such chemical fumes can result in
damage to the camera’s circuitry, resulting in short circuits and causing the
camera to emit smoke or catch fire.
a
CAUTION
Rubbing or pressing strongly on the LCD monitor screen can result in
damage or malfunctions. If there is dust or dirt on the LCD monitor, blow it off
with a blower brush. Heavy soiling should be wiped off using soft cloth.
If the LCD monitor should become broken, take precautions to prevent
personal injury from glass fragments.
If the LCD monitor breaks and its liquid contacts your skin, quickly wipe away
any remaining liquid and wash the skin with soap and water. If the liquid
should enter the eyes, wash with clean running water for at least 15 minutes,
then seek medical attention immediately.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera fine cam sl 400 r at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera fine cam sl 400 r in the language / languages: English as an attachment in your email.

The manual is 6,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info