512519

Kyocera CONTAX U4R Manual

8
Zoom out
Zoom in
Previous page
1/198
Next page
Introduction Getting Ready
Taking Pictures
Playback Set Up
EN-8
NEXTBACK
Contents Glossary Index Nomenclature Menus and Settings Troubleshooting
• This camera is not designed to be waterproof, and cannot be used in the rain or under water. If the camera
should inadvertently be exposed to water, it should be taken quickly to a Contax Service Center for
inspection.
• Take great care to keep the photography lens and other parts clean since soiling such as fingerprints can
affect the accuracy of the camera's metering and focusing functions. If these areas become soiled and
require cleaning, wipe them gently with the supplied cleaner or a third-party lens cleaning cloth. Any dust or
debris should be removed using a blower or lens brush.
• Clean the camera body by wiping with soft cloth. Never use benzene, thinner, or other volatile solvents or
cleansers, since such substances will damage the body materials.
• Do not remove the SD memory card or Multi-Media Card (MMC) while the card access LED is flashing.
• Interference may occur in recorded or played back images when the camera is used in areas subject to
strong electromagnetic interference (e.g., near a television set or stereo speakers).
• Do not direct the camera lens directly toward the sun when shooting, since the CCD element may be
damaged.
• If the camera is dropped, it may be damaged internally or parts may have been dislodged even when there is
no visible external damage. The camera must be taken to a Contax Service Center for checking.
• Do not attempt to touch the insides of the memory card slot, since damage or malfunction may result.
F
CAUTION
• Clean the camera well after using it at the beach or other locations subject to
large concentrations of sand or dust. Salt air may promote corrosion of metal
components and damage or short circuits in electronic parts, causing the
camera to emit smoke or catch fire. Sand inside the camera may result in
internal damage and operating malfunctions.
• If the camera is brought quickly from a cold place to a warm room,
condensation may form on the lens and internal parts. Such condensation
may result in damage or short circuits in electronic parts, causing the camera
to emit smoke or catch fire. Whenever possible, avoid subjecting the camera
to sudden changes in temperature.
• This camera is a precision electronic instrument, and should be protected
from impacts and falls that might cause damage to internal parts or the
shorting of circuitry.
• This camera is an electronic device which uses a high-performance IC. The
heat emitted from the IC may make the camera hot during use. It is not a
failure.
• When taking the camera overseas or using it to record important events,
check its operating condition and take test pictures beforehand to
confirm proper operation.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kyocera CONTAX U4R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kyocera CONTAX U4R in the language / languages: English as an attachment in your email.

The manual is 10,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info