598327
49
Zoom out
Zoom in
Previous page
1/76
Next page
47
MAINTENANCE
3. The spring 3 and the oil strainer screen 4 will come out
when the cap 2 is removed. Let the engine oil drain out.
4. Clean the oil strainer screen.
5. Make sure the oil strainer screen, the seal on the screen,
and the drain plug O-ring 5 are in good condition.
6. Install the oil strainer screen, the screen seal, the drain
plug O-ring and the oil strainer screen cap. Torque the cap
to the specified torque.
33
33
3
55
55
5
44
44
4
22
22
2
Engine oil capacity: 0.95 qt (0.8 L)
Engine oil viscosity: SAE 15W-40
Oil strainer screen cap torque:11 lb-ft (15 N.m)
7. Add the specified engine oil through the oil filler/dipstick
hole (amount is after draining).
8. Replace the oil filler/dipstick and tighten it securely.
9. Start the engine and let it idle for 2 - 3 minutes.
Do not overfill the engine with oil. Overfilling the en-
gine can cause oil leaks and/or oil contamination of
the air filter element. Always make sure the oil level is
above the "L" mark but not higher than the "F" mark
on the dipstick.
10. Stop the engine and recheck the oil level. Make sure the
oil level is at the upper mark “F” on the dip stick 1 when
the scooter is parked upright on level ground. Make sure
there are no oil leaks and reinstall the dip stick.
F
L
11
11
1
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kymco Yager 200i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kymco Yager 200i in the language / languages: English as an attachment in your email.

The manual is 4,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info