Manual Kymco Yager 200i (page 12 of 76) (English)

598327

Zoom out

Zoom in

1/76

Use the ignition key to operate the ignition switch, the steering

lock and open the fuel filler cap:

Position: All electrical circuits are off. The engine will not start

or run. The key can be removed from the ignition switch.

Position: The ignition circuit is "ON" and engine can now be

started. The key cannot be removed from the ignition switch in

this position.

Position: To lock the steering, turn the handlebar all the way

to the left, push in and turn the key to the " " position and re-

move the key . All electrical circuits are off and the key can be

removed.

Keys

Your Yager scooter is supplied with two identical ignition switch

keys 1. The ignition key operates the ignition switch and the

steering lock, and is used to open the seat to gain access to

the underseat storage compartment.

NOTE: The keys have a unique code

stamped on the tab supplied with

the keys. For security reasons,

this code is not stamped on the

scooter or recorded in the

vehicle's basic documentation.

Therefore, since this code is known only to you and is required

to obtain replacement keys, it is important that you record it in

the box provided on the inside, rear cover of this manual.

Ignition switch & Steering lock

After locking the ignition switch, turn the handlebar gen-

tly to confirm that the steering is locked.

Do not turn the ignition switch to the lock position when

riding, as this could cause the steering to lock and re-

sult in you losing control of your scooter. Do not park

your scooter in a position that will interfere with vehicle

or pedestrian traffic.

CONTROLS & FEATURES

Position: To open the fuel filler cap, turn the key to the

“ “ position. Before starting the engine, return the key to the

“ “ position.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kymco Yager 200i in the language / languages: English as an attachment in your email.

The manual is 4,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kymco Yager 200i Manual

Product: