598325
42
Zoom out
Zoom in
Previous page
1/56
Next page
40
MAINTENANCE
Transmission fluid change
1. Place the scooter on its main stand.
2. Place a suitable container (drain pan) under the transmis-
sion case on its left side. Remove the drain bolt 4 to
drain the fluid.
3. After the fluid has drained out, reinstall the drain bolt with
a new sealing washer and tighten it to the specified torque.
Transmission fluid type: SAE 90
Transmission fluid capacity: 0.19 qt (0.18 L)
NOTE: The fill amount specified is the amount to use after
completely draining the used transmission fluid.
6. Install the transmission fluid filler bolt with a new sealing
washer and tighten it to the specified torque.
Transmission fluid filler bolt torque: 15 lb-ft (20 N-m)
Transmission fluid drain bolt torque: 15 lb-ft (20 N-m)
4. Remove the transmission fluid filler bolt 3.
5. Add the
exact amount of the specified fluid through the
fluid filler hole 5.
Using the wrong transmission fluid type or viscosity
may cause premature transmission component wear.
Do not exceed the specified amount when adding trans-
mission fluid. If too much fluid is added to the trans-
mission case it could be forced into the air cleaner as-
sembly during operation, causing air filter contamina-
tion and poor engine performance.
33
33
3
44
44
4
55
55
5
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kymco Super 8 - 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kymco Super 8 - 50 in the language / languages: English as an attachment in your email.

The manual is 4,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info