598322
48
Zoom out
Zoom in
Previous page
1/68
Next page
46
1. Place a suitable container (drain pan) under the left crank-
case. Remove the drain bolt 1 to drain the oil.
3. Replace the drain bolt 1. Tighten it to the specified torque.
Engine oil capacity (total): 1.20 qt (1.10 L)
Engine oil capacity (oil change): 0.90 qt (0.85 L)
Engine oil viscosity: SAE 15W-40
MAINTENANCE
Oil drain plug torque: 18 lb-ft (25 N-m)
4. Remove the oil filler/dipstick 4 from the right crankcase
cover.
5. Add engine oil through the oil filler/dipstick hole.
44
44
4
11
11
1
2. Remove the oil filter screen cap and remove the oil filter
screen 2 and spring 3 from the bottom of the crank-
case. Clean the screen and reinstall it and the spring, and
tighten the cap securely.
22
22
2
33
33
3
6. Wipe the dipstick off with a clean cloth and reinstall it in its
hole, but do not thread it into the engine case. Push the
dip stick in until it touches the case.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kymco People S 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kymco People S 250 in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info