664096

Kymco MAXER ForU Manual

15
Zoom out
Zoom in
Previous page
1/41
Next page
GENERAL SAFETY INFORMATION
WARNING! It is dangerous to transfer to and
from your scooter on your own. It requires good
balance and agility. Be aware that there is a point during
every transfer when the seat is not below you.
WARNING! To make a safe transfer: Always turn
off the power before you transfer to or from your
scooter. If you fail to do so you may touch the throttle
control lever and cause your scooter to move when you
do not expect it. Make sure motor locks are engaged;
this keeps the scooter from moving when you transfer.
Work with your health care professional to learn how to
position your body and how to support yourself during a
transfer. Have someone help you until you are sure you
do a safe transfer on your own. Move your scooter as
close as you can to the seat you are transferring to.
Transfer as far back onto the seat surface as you can.
This will reduce the risk that you will miss the seat or
fall.
WARNING! Never transport the scooter in the
front seat of a vehicle. It may shift and interfere
with the driver.
WARNING! Always secure the scooter so that it
cannot roll or shift.
WARNING! Refer to the tire pressure
recommended in your user manual to ensure
best control. Only inflate the tires using a regulated,
low-pressure air source with an available pressure
gauge. Do not underinflate or overinflate your tires. Low
pressures may result in loss of control, and high
pressures may result in the rupturing of tires. Check
your tire pressure at least once a week.
WARNING! Should the fittings on your seating
system become loose, please call your approved
service provider.
WARNING! Replace worn or damaged upholstery
immediately to reduce the risk of fire hazard.
12
… 15 …


Need help? Post your question in this forum.

Forumrules
1

Forum

kymco-maxer-foru

Reset search

  • My Kymko maser has just had a tuneup. Went to use it first time since the tuneup. The service wrench symbol is showing & when speeding up the digital speedo numbers flicker Submitted on 1-5-2023 at 21:18

    Reply Report abuse

  • My Kymko maker has just had a tuneup Went to use it first time since the tuneup. The service wrench symbol came up on the dash display & the speedo numbers flicker as I am speeding up
    How can these problems be rectified ? Submitted on 1-5-2023 at 21:13

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kymco MAXER ForU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kymco MAXER ForU in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info