522403
63
Zoom out
Zoom in
Previous page
1/65
Next page
TracVision M3/M2 User’s Guide
72
Appendix C - Programming User-Defined Satellites
4. Type the following @SATCONFIG command then
press Enter:
@SATCONFIG,X,E,F,G,H,I,J,K
5. Repeat Step 4 for each polarization/band:
If your selected satellite does not have information for
one or more of these transponder categories, you can
enter the following default values instead:
6. Type @DEBUGOFF then press Enter.
7. Type ZAP then press Enter. The antenna restarts. Wait
one minute for system startup.
8. Follow the steps in “Selecting Satellites to Track” on
page 27 to select your new USER A or USER B satellite.
Field Description
X User-defined satellite stored in antenna library
(996W = User A; 997W = User B)
E Frequency, MHz (00000 or 10700-12700)
F Symbol rate, kilosymbols per second (10000-45000)
G FEC code (12, 23, 34, 56, 67, or 78)
H Network ID, hexadecimal (0x####)
I Polarization (V = vertical; H = horizontal)
J LNB down conversion frequency
(L = low; H = high; G = Latin America; S = Sinosat)
K Decoding type (1 = DSS-A; 2 = DSS-B; 3 = DVB)
Vertical High
•Vertical Low
Horizontal High
Horizontal Low
Transponder Data Default Value
Frequency 00000
Symbol rate 27500
FEC code Same value as other transponders
with valid data
Network ID 0x0000
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KVH TracVision M2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KVH TracVision M2 in the language / languages: English as an attachment in your email.

The manual is 4,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of KVH TracVision M2

KVH TracVision M2 Installation Guide - English - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info