482600

Kuppersbusch LB 632.0 WG Manual

13
Zoom out
Zoom in
Previous page
1/40
Next page
13
3.2 - Synthetic filters
1 - This filter cannot be washed and should be replaced every two months. If the filter is provid
ed with a saturation indicator, replace when the violet color of the dots which are visible from
the outside is spread over the whole surface of the filter.
2 - Replacement:
a) Remove the ducting grill, referring to paragraph 3.1.3. on installation.
b) After having taken off the ducting grill, remove the filter stops (1). Replace the grease filter
(2) (fig. 7).
c) Close the ducting grill up again.
3.3 - Grease Filters (metal panels)
1 - Cleaning
The metal grease filter should be cleaned every two months with normal usage and can be
cleaned in a dishwasher or by hand using mild detergent or liquid soap.
2 - Replacement:
a) Remove the ducting grill, referring to paragraph 3.1.3. on installation.
b) After dismantling the ducting grill, remove the filter stops (1). Wash the metal panels (2)
(fig. 7).
c) Close the ducting grill up again.
ATTENTION: There could be a possible fire hazard if the filters are not replaced according
to these instructions.
3.4 - Charcoal filters
1 - Functioning
In the recycling mode the charcoal filters absorb smell and odours. The charcoal filter cannot
be washed or regenerated and should be replaced every 2 months or more frequently if the
hood is used consistently.
2 - Replacement:
a) Remove the ducting grill, referring to paragraph 3.1.3. on installation.
b) Replace the active charcoal filter (fig. 8).
3.5 - Lighting
1 - This is provided by two 40 W lamps or by two 20 W haolgen lamps. If the lamps do not
work, open the suction grille and check that they are properly fitted. If the lamps have burned
out they must be replaced using others of equivalent voltage and power.
2 - Replacement:
a) 40 W lamp (fig.9), unscrew the burned out lamp and fit the new one.
b) 20 W halogen lamp (fig.10), extract the lamp by pulling gently. When replacing, ensure
that the pins are correctly inserted into the lamp holders.
3. Replace the suction grille.
3.6 - Cleaning
When cleaning the hood:
- Never use a wet cloth or sponge, or running water.
- Never use thinners or products containing alcohol, as they might damage the paintwork.
- Never use abrasive cleaning materials, in particular when cleaning stainless steel surfaces.
It is recommended to use a damp cloth and mild liquid household cleaner.
Part 2 - OPERATION AND MAINTENANCE INSTRUCTIONS
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kuppersbusch LB 632.0 WG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kuppersbusch LB 632.0 WG in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info