457446
19
Zoom out
Zoom in
Previous page
1/29
Next page
19 Service Manual
For internal use only
Door alignment
The door must be parallel and flush with the
control panel. The clearance between the door
and the control panel must be approx. 7 mm.
In order to avoid alignment problems as a result of
transporting the appliance, the door is fastened to
the casing with adhesive tape to protect the
appliance from strong vibrations.
The door can also be aligned when it has been
mounted. The hinged door holder (spare-part no.
528895) must be released in order to relieve the
door tension. The door will then need to be adjus-
ted so that the clearance between the door and
the control panel is 7 mm. The screws are then
tightened again.
6.4 Control panel
1. Remove the four fastening screws.
2. Loosen the four clips on the lower edge first and then those on the top edge.
3. Now carefully pull out the control panel, paying close attention to the cables and the electronic
components.
Caution! Be particularly careful with the inner frame after the control panel has been
removed, since it may break.
7 mm
hinged door holder
Screws
19


Need help? Post your question in this forum.

Forumrules
1

Forum

kuppersbusch-emwk-1050

Reset search

  • My microwave oven is in safe mode. How to unlock it? Submitted on 17-9-2022 at 09:30

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kuppersbusch EMWK 1050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kuppersbusch EMWK 1050 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kuppersbusch EMWK 1050

Kuppersbusch EMWK 1050 User Manual - German - 38 pages

Kuppersbusch EMWK 1050 User Manual - Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info