457446
13
Zoom out
Zoom in
Previous page
1/29
Next page
13 Service Manual
For internal use only
4. Function tests
4.1 Safety precautions - microwave energy
Service technicians must never be exposed to the microwave radiation which can be
emitted by the magnetron or other components producing microwaves if the appliance
is not connected correctly or operated improperly.
All input and output connections, waveguides, flanges and seals are to be attached and
sealed correctly.
Never operate the appliance without having placed items in the cooking cavity which
absorb the microwaves.
Never look into the open waveguide or the antenna when the. magnetron is live.
The appliance must never be operated without the housing or with the door open.
If the fuse blows, always block the system operability first (all microswitches) before the
appliance is switched on again. If a microswitch is defective, always replace all micro-
switches.
Before activation of the magnetron or before repair work, check the following points with all
appliances:
The door does not close properly at the frame because it is deformed or the hinges are damaged.
Door or door seal damaged.
Appliance obviously damaged.
All defective or incorrectly set components in the locking, control, door locking, microwave generator and
transmission systems must be repaired, replaced or correctly set. Service technicians must first remove
their watches for all work on or near the magnetron.
Attention!
The high-voltage capacitor could still be electrically charged about 30 sec. after the appliance has
been switched off. It is advisable to discharge the capacitor each time through both poles using a
suitably insulated cable. Secondary power circuits of the transformer have a high voltage and a low
amperage and for this reason it is extremely dangerous to work near these components if the
appliance is plugged into the mains. Never touch cables with your bare hands or with non-insulated
tools when the appliance is in operation.
Do not measure the electric voltage of a high-voltage circuit or magnetron filament.
Make sure that the door is not loose or missing. If the screws are not properly tightened, this could
lead to the discharge of microwaves.
Before you switch on the appliance, check that all electric connections are tight.
Ensure with a reasonable procedure that no microwaves are emitted.
Do not insert any metal objects through the lamp gap or through any other gap as such objects could
act as an antenna and could result in the emission of microwaves.
13


Need help? Post your question in this forum.

Forumrules
1

Forum

kuppersbusch-emwk-1050

Reset search

  • My microwave oven is in safe mode. How to unlock it? Submitted on 17-9-2022 at 09:30

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kuppersbusch EMWK 1050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kuppersbusch EMWK 1050 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kuppersbusch EMWK 1050

Kuppersbusch EMWK 1050 User Manual - German - 38 pages

Kuppersbusch EMWK 1050 User Manual - Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info