457446
5
Zoom out
Zoom in
Previous page
1/29
Next page
5 Service Manual
For internal use only
1.1 Microwave warnings
The microwave oven generates high voltages which may lead to serious or even fatal injury -
it is essential to observe the safety regulations contained in this repair manual at all times.
Always disconnect the microwave from the mains prior to removing or installing components. Never
attempt to measure voltage on the inverter, the magnetron or high-voltage conducting wire. This
high-voltage circuit generates voltages exceeding 4000 volts.
Always connect the microwave oven to a residual current overload circuit breaker prior to measuring
electric currents.
Check to ensure that the power required by the oven does not exceed the nominal power of the
mains power supply.
Pull the plug out of the mains socket and discharge the high-voltage capacitors of the converter
switch prior to removing or installing components.
Connect the microwave oven with a twin-wire extension cable. The microwave oven must be
earthed. Looking for faults on a microwave oven that is not earthed is extremely dangerous.
Carry out a functional test when repair work has been completed.
Carry out a microwave leakage current test when repair work has been completed.
1.2 Electric connection
Only connect the appliance to sockets with a safety fuse of at least 16 A. Please also check to
ensure that the main fuse in your home has a minimum output of at least 16 A so that it will not sud-
denly trip when the microwave oven is in operation.
Before operation, check whether the mains voltage is the same as that indicated on the name/rating
plate of the appliance and whether the socket outlet is effectively earthed. The manufacturer
assumes no liability for damage which occurs through the non-observance of these regula-
tions.
1.3 Converter switch warnings
The converter switch generates current of more than 4000 volts! Never attempt to measure the volt-
age in this switch.
The aluminium dissipater on the converter switch gets very hot! Allow the dissipator to cool down
prior to removing the converter switch.
Pull the plug out of the mains socket and discharge the high-power capacitors of the conversion
switch before removing the converter switch.
The converter switch must be earthed. After replacing the converter switch tighten the earth terminal
and the earthed leads to the microwave oven casing. A converter switch with no earth connection
may be dangerous.
5


Need help? Post your question in this forum.

Forumrules
1

Forum

kuppersbusch-emwk-1050

Reset search

  • My microwave oven is in safe mode. How to unlock it? Submitted on 17-9-2022 at 09:30

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kuppersbusch EMWK 1050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kuppersbusch EMWK 1050 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kuppersbusch EMWK 1050

Kuppersbusch EMWK 1050 User Manual - German - 38 pages

Kuppersbusch EMWK 1050 User Manual - Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info