Manual Kuppersbusch EKI9852.1F (page 17 of 18) (English)

513939

Zoom out

Zoom in

1/18

 The piece of furniture or the support in which the hob is to be fitted, as well as the edges of

furniture, the laminate coatings and the glue used to fix them, must be able to resist

temperatures of up to 75 °C.

 The mural rods of edge must be heat-resisting.

 Not to install the hob to the top of a not ventilated oven or a dishwasher.

 To guarantee under the bottom of the hob casing a space of 20 mm to ensure a good air

circulation of the electronic device.

 If a drawer is placed under the work, avoid to put into this drawer flammable objects (for

example: sprays) or not heat-resistant objects.

 Materials which are often used to make worktops expand on contact with water. To protect

the cut out edge, apply a coat of varnish or special sealant. Particular care must be given

to applying the adhesive joint supplied with the hob to prevent any leakage into the

supporting furniture. This gasket guaranties a correct seal when used in conjunction with

smooth work top surfaces.

 The safety gap between the hob and the cooker hood placed above must respect the

indications of the hood manufacturer. In case of absence of instructions respect a distance

minimum of 760 mm.

 The connection cord should not be subjected, after building-in, to any mechanical

constraint (for instance constraint given by a drawer installed below).

Ventilation

 The cooktop ventilation can be improved by adding an opening in kitchen furniture back

wall, just under the cut out of the worktop.

 The front cross member of the furniture must be fined down on the whole width of the cut

out, in order to allow an air passage under the worktop.

 Any cross beneath the worktop must be removed if it is located partly or totally into the cut

out area .

 When building-in the cooktop, make sure not to obstruct the openings foreseen in the

casing of the hob. These holes are necessary for an efficient ventilation of the appliance.

 Avoid any excessive heating under the cooktop, eg related to a poorly ventilated and/or

insulated oven.

 If the induction hob is installed over a pyrolytic oven, it cannot be used as long as the

pyrolytic function is activated.

ELECTRICAL CONNECTION

 The installation of this appliance and the connection to the electrical network should be

entrusted only to an electrician perfectly to the fact of the normative regulations and which

respects them scrupulously.

 Protection against the parts under tension must be ensured after the building-in.

 The data of connection necessary are on the stickers place on the hob casing near the

connection box.

 The connection to the main must be made using an earthed plug or via an omnipolar

circuit breaking device with a contact opening of at least 3 mm.

 The electrical circuit must be separated from the network by adapted devices, for example:

circuit breakers, fuses or contactors.

 If the appliance is not fitted with an accessible plug, disconnecting means must be

incorporated in the fixed installation, in accordance with the installation regulations.

 The inlet hose must be positioned so that it does not touch any of the hot parts of the hob

or even.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kuppersbusch EKI9852.1F in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kuppersbusch EKI9852.1F

Kuppersbusch EKI9852.1F User Manual - German - 19 pages

Kuppersbusch EKI9852.1F User Manual - French - 18 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kuppersbusch EKI9852.1F Manual

Product: