661112

Kuppersbusch EEB 6860.1 Manual

10
Zoom out
Zoom in
Previous page
1/27
Next page
35
Special settings
These settings can be accessed by pressing the function selector for
6 seconds. The setting is changed by pressing the function selector or
after a few seconds without turning or pressing it, except in the language
selection function, which appears just after plugging in the oven.
Setting the language function
Select the language on the text display. This can be done after tuning the
oven on.
Turn the function selector to choose the language and next press to
accept. Once the language is selected it cannot be changed. To select
another language, unplug the oven.
Adjusting brightness
Adjust the brightness of the two displays by turning the function selector
to the right or left.
Demonstration mode
If you select ON on the text display, you will see that when you select a
cooking function, the oven will not heat up. “Demonstration Mode” will
appear on the left display every minute.
To disable the function select OFF.
Maximum cooking time
Set the maximum time in hours that the oven can operate. You can select
between 1 and 28 hours.
Active safety function
Reduce the maximum cooking temperature in all cooking functions,
between 250°C and 50°C
Eco-function
This allows you to turn off the two displays or keep them on, when
the oven is off. When the display is off (Eco-function ON), electricity
consumption is reduced. You can view the current time by pressing any
glass key or the function selector. When the oven is turned off, the display
will gradually turn itself off.
Fast heating function
You can disable (select OFF) or turn on (select ON) fast heating in the
oven’s cooking functions.
Memory function /
The oven has a memory function you can use to store two programmes
you have composed yourself as additional programmes.
Saving an additional programme:
Select a baking, roasting or heating programme.
Set the desired temperature and time.
Hold the memory sensor or depressed, until the text displays
<programme saved>.
The programme set can now be saved with
or and can be used
like every other baking, roasting or heating programme.
Choosing an additional programme:
Press the or sensor and confi rm by touching.
The programme starts.
The values set can be changed without such changes being saved.
Roasting
Use of the thermoprobe is recommended. The cooking time is deter-
mined by the thermoprobe, making its design ideal for roasting.
Setting a programme
1. Setting an automatic cooking recipe
The temperature is determined by the weight of the roast. The cooking
time is also determined if you intend to roast without the thermoprobe.
Both values are pre-programmed but can be changed (see previous
sections).
Before using the thermoprobe, set the weight.
Or
2. Setting a conventional cooking function
Each cooking function is associated with a pre-programmed temperature.
This temperature can be changed. You can set the cooking time and end
time. If you use the thermoprobe, you can set the cooking start time and
the oven temperature.
Turning the roast over
With the conventional cooking functions, the joint of meat must be
turned over after about 2/3 of the cooking time has passed so that it
browns evenly. If using a hot air function, you do not need to turn the
roast.
For automatic cooking recipes, once approximately 70% of the time has
passed, an alarm will sound to alert you that the roast needs turning over.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kuppersbusch EEB 6860.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kuppersbusch EEB 6860.1 in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info