514228
9
Zoom out
Zoom in
Previous page
1/22
Next page
Cookerhood mounting
1. Remove the packaging and check the appliance for any visible damage.
2. Dismount the glass by removing the nuts (A). (afb.01)
3. Open the service hatch by removing the 6 screws (B). (afb.02)
4. Remove the plug for the control (left cable). (afb.03)
5. Dismount the under plate by removing the screws (C). (afb.04)
6. Determine the centre of the hood over the stove. Use a plumb to mark the centre of
the unit on the ceiling.
7. Use the empty body of the hood as a template to determine the place of the fitting
holes.
8. Drill 4 holes (4x M8) and install the plugs and bolts, let 20mm of thread stick out.
9. Before mounting the body connect the unit to the main power and ducting.
5 possibilities for exhaust air connection (150mmØ)
10. Mount the under plate and connect the plug for the control. Put the Service hatch
back in place and mount the glass.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kuppersbusch EDL 12700.0GE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kuppersbusch EDL 12700.0GE in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info