621044
23
Zoom out
Zoom in
Previous page
1/30
Next page
48
What should I do if the oven doesn’t work?
WARNING! Any type of repair must only be done by a
specialised technician. Any repair done by a person not
authorised by the manufacturer is dangerous.
You do not need to contact Technical Assistance to resolve
the following questions:
The display is not showing! Check if:
- The time indication has been switched off (see section on
Basic Settings).
Nothing happens when I press the keys! Check if:
- The Safety Block is active (see section on Basic Settings).
The oven does not work! Check if:
- The plug is correctly fitted in the socket.
- The oven’s power is switched on.
When the oven is operating I can hear some strange
noises! This is not a problem.
- It has to do with the operating noises that can occur
during the cooking process, e.g, by the water pumps in
the steam generator.
- The steam inside the cavity produces a pressure build-up
and sometimes the cavity walls may produce noise when
they react to the pressure.
- This noises are normal, there is no problem.
The food doesn’t heat up or heats very slowly! Check
if:
- You have selected the correct operating times and
temperature setting.
- The food you have put inside the oven is a larger amount
or colder than you usually put in.
If the message Err_” appears in the display, please
contact the Customer Care.
The appliance still makes a noise after the cooking
process is finished! This is not a problem.
- The cooling fan keeps on working for some time. When
the temperature has dropped sufficiently, the fan will
switch itself off.
The oven switches on but the interior light does not
go on!
- If all the functions work properly it is probable that the
lamp has blown. You can keep on using the oven.
Replacing the light bulb
To replace the light bulb, proceed as follows:
- Disconnect the oven from the power supply. Take the
plug out of the socket or switch off the oven’s power
circuit.
- Unscrew and remove the glass light cover (1).
- Remove the light bulb (2). Warning! The bulb may be
very hot.
- Fit a new E14 230-240V/15W bulb. Follow the lamp
manufacturer’s instructions.
- Screw the glass light cover into place (1).
- Connect the oven again to the power supply.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kuppersbusch EDG6260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kuppersbusch EDG6260 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kuppersbusch EDG6260

Kuppersbusch EDG6260 User Manual - German - 31 pages

Kuppersbusch EDG6260 User Manual - Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info