621044
13
Zoom out
Zoom in
Previous page
1/30
Next page
38
When the oven is working...
Interrupting a cooking cycle
You can stop the cooking process at any time by pressing
the Start/Stop key once.
The oven incorporates a steam-reduction function that is
activated when the Start/Stop key is pressed to gradually
release the steam from the cavity, so that there is no sudden
rush of steam when the appliance door is opened.
This function takes around 3 minutes and during it the display
shows the word VAP.
Warning! When opening the door during or upon
completion of the cooking cycle, be careful of the flow of
hot air and/or steam coming out of the cooking chamber.
Step back or to the side to avoid burns.
At this point:
The steam generation is interrupted.
The cavity walls and the water tank are still very hot.
Danger of burning!
The timer stops and the display shows the remaining
operating time (if this has been set).
If you wish, at this point you can:
1. Turn or stir the food to ensure it will be evenly cooked.
2. Change the cooking parameters.
To restart the process, close the door and press the
Start/Stop key.
Altering parameters
The duration can be altered when the oven is operating or
when the cooking process has been interrupted by turning
the rotating knob. The new duration defined is valid when the
display stops blinking.
The temperature can only be altered when the oven is
interrupted. Alter the temperature by pressing the Function
Selector key and turning the Rotating Knob until the new
temperature is blinking. Validate the selection by pressing
again the Function Selector key.
Cancelling a cooking cycle
If you wish to cancel the cooking process, press the
Start/Stop key for 3 seconds.
You will then hear a beep and the clock will appear on the
display.
End of a cooking cycle
At the end of the set duration or when you press the
Start/Stop key to finish the cooking cycle, you will hear three
beeps and the display will show the word End”, the oven
starts the steam-reduction function.
This function gradually releases the steam from the cavity, so
that there is no sudden rush of steam when the appliance
door is opened.
This function takes around a minute and during it the display
shows the word “VAP”.
Warning! When opening the door during or upon
completion of the cooking cycle, be careful of the flow of
hot air and/or steam coming out of the cooking chamber.
Step back or to the side to avoid burns.
The cooling fan can continue to run for a certain length of
time after the appliance has been switched off. This is a
normal function that is meant to reduce the temperature
inside the oven.
When the display shows the word “DEP”, this means that the
water was pumped and that the water tank can be removed.
Remove the water tank and dry it thoroughly. Let the cooking
space cool down for a moment and then clean and dry it with
a cloth. The door should be left open for some time so that
the appliance can dry completely.
Residual water in the oven
To reduce the residual water in the oven, it is recommended
to insert a tray in the bottom rack level. The condensation
released from the food begins to drip on the tray. The
remaining residual water can be easily dried with a cloth.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kuppersbusch EDG6260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kuppersbusch EDG6260 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kuppersbusch EDG6260

Kuppersbusch EDG6260 User Manual - German - 31 pages

Kuppersbusch EDG6260 User Manual - Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info