482603
7
Zoom out
Zoom in
Previous page
1/32
Next page
EN
Basic settings
Initial Settings
After your steam oven is first plugged in or after a
power failure, the clock display will flash to
indicate that the time shown is not correct.
The oven will not operate until the clock, the water
hardness parameter and the Calibration is set.
To set the clock and the water hardness
parameter value proceed as described in the
following chapters.
Setting the clock
The clock display will flash if your appliance is first plugged in or after a power failure, to indicate that the
time shown is not correct. To set the clock, proceed as follows:
To set the clock, proceed as follows:
1. Press the “On/Off” key to switch the oven on.
2. Hold down the and +keys simultaneously.
The hour digits will flash (steps 1 and 2 are not
necessary when the oven is first plugged in or
after a power failure).
3. Press the ” and “+ keys to set the hours.
4. Press the OK key to confirm the hours. The
minutes digits will flash.
5. Press the “” and “+” keys to set the minutes.
6. Press the OK key to confirm the minutes.
Water Hardness setting
The appliance features a system that automatically
indicates when it is time to descale.
The system can be optimised for households with
very soft water (also through using a water softening
appliance) and very hard water, by changing the user
settings to the relevant range of water hardness (see
table below).
To set the water hardness parameter, proceed as
follows:
1. Press the “On/Off” key to switch the oven on.
2. Press the “Left and Right” keys at the same
time. The hardness grade will start to flash on the
display (steps 1 and 2 are not necessary if your
microwave oven is first plugged in or after a power
failure).
3. Press the and + keys to set the correct water
hardness parameter value, according to the below
table.
4. Press the “OK” key to set the parameter. The
display shows the clock.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kuppersbusch EDG 6550.0BC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kuppersbusch EDG 6550.0BC in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kuppersbusch EDG 6550.0BC

Kuppersbusch EDG 6550.0BC Manual - German - 15 pages

Kuppersbusch EDG 6550.0BC User Manual - German - 32 pages

Kuppersbusch EDG 6550.0BC User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info