663515

Kuppersbusch EBC 620.8 Manual

10
Zoom out
Zoom in
Previous page
1/18
Next page
27
EBC/EHC 620.8
25
EBC 615.8
Electronic clock
Setting/changing the time
The clock must be set before first-time oven use and after any interrup-
tion to the power supply. The oven will only work once the clock time
has been set. If the clock time is not set, the digits and the word AUTO
on the left of the display will flash.
To set the clock:
– Push the + and – controls at the same time
for a few seconds. The · symbol between
the digits will begin to flash.
– Set the correct time with + and – controls.
The clock will start after 30 seconds and
the · symbol will stop flashing.
Setting the minute minder
The minute minder will not turn off the oven.
– Press MODE
once until the signal flas-
hes.
– Adjust the duration with + and – for the desi-
red hours and minutes you want the alarm to
sound after. After a short wait the signal
will go on and the minute minder will start to
work.
– After the set time has elapsed, an alarm will sound and the will start
to flash.
– Press any key to stop the alarm.
If the alarm is not stopped, it will turn off by itself after 2 minutes.
Setting the cooking duration timer
– Press MODE twice until the letters “dur”
appear and the AUTO control symbol flashes
on the left of the display.
– Set the desired duration on the timer with +
and – for the hours and minutes after which
you want the oven to switch off. After a short
wait the AUTO control symbol will come on.
The timer shows the current time.
– After 6 seconds the function will switch itself on.
You can see the remaining cooking time by pressing MODE . This
time can be changed by pressing + or –.
– Choose the heat and temperature settings.
– Once the set time has elapsed, the oven will turn itself off. An alarm will
sound and the AUTO control symbol will start to flash.
– Press any key to stop the alarm. The AUTO control symbol will conti-
nue to flash.
– To turn the oven off completely turn all controls to 0 and press MODE
. The control symbol will appear between the digits.
Setting the cooking end timer
– Press MODE three times until the word
“END” appears and the AUTO control sym-
bol flashes on the left of the display.
– Use + and – to set the desired time for co-
oking to end. After a short wait the AUTO
control symbol will come on. The timer
shows the current time.
– After 6 seconds the function will switch itself on.
You can see the set cooking end time by pressing MODE . This time
can be changed by pressing + or –.
– Choose the heat and temperature settings.
– The oven will turn off immediately once the time set for cooking to stop
is reached. An alarm will sound and the AUTO control symbol will start
to flash.
– Press any key to stop the alarm. The AUTO control symbol will conti-
nue to flash.
– To turn off the oven completely, turn all controls to 0 and press MODE
. The control symbol will appear between the digits.
Setting the automatic cooking start and end timer
– Press MODE twice until the letters “dur”
appear and the AUTO control symbol flashes
on the left of the display.
– Set the desired duration in hours and minu-
tes by pressing + and –. After a short wait the
AUTO control symbol will come on.
– Press MODE
until the word “END” appears
and the AUTO control symbol flashes on the
left of the display.
– Use + and – to set the desired time for coo-
king to end. After a short wait the AUTO con-
trol symbol will come on. The timer shows the
current time.
– Choose the heat and temperature settings.
– The oven will remain off and the AUTO control lamp will come on. The
oven is now programmed.
– When it is time for the cooking to start, the oven will turn on automa-
tically and will cook for the set duration. The
control symbol will
appear between the digits.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kuppersbusch EBC 620.8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kuppersbusch EBC 620.8 in the language / languages: English as an attachment in your email.

The manual is 15,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kuppersbusch EBC 620.8

Kuppersbusch EBC 620.8 User Manual - German - 19 pages

Kuppersbusch EBC 620.8 User Manual - Dutch - 19 pages

Kuppersbusch EBC 620.8 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info