735580
3
Zoom out
Zoom in
Previous page
1/20
Next page
CO2 CONTROL - assembly and operating instructions
-3-
0 Introduction
These assembly and operating instructions contain all of the information necessary for the installation, commissioning and maintenance of the CO2 CONTROL
CO
2
gas detection system.
0.1 Safety information
Symbol Definition
1 Area of application
1.1 Use in accordance with BGR 228
The CO2 CONTROL gas detection system was designed in accordance with the requirements of the former TRSK 313 (Technical Requirements for Gas Detection
Devices), the current DIN6653-2 and the former TRSK 403 (Requirements for Installation, Operation and Repair), and today in accordance with BGR 228, and
complies with all statutorily required functions. However, this is only applicable to CO2 CONTROL security systems which are calibrated for 1.5% CO2 preliminary
alarm and 3% CO2 main alarm signals!
Since 07/05/1996, the legislative authority requires special protective measures in order to be able to prevent hazards due to gas leaks (Betr.Sich.V.).
A specific protective measure requires premises 1.5 m below ground level to be fitted with permanent ventilation/floor extraction, or alternatively, a gas
detection system. Walk-in cold chambers must always be secured, regardless of their installation location!
1.2 Use in refrigeration systems with CO
2
coolant
Special safety system requirements, in CO2 CONTROL PA, CO2
CONTROL AM and CO2 CONTROL AM PLUS versions, are installed for the monitoring of
refrigeration systems (DIN EN 378) with CO
2
coolant, mainly in the food trade and processing industries.
Normally, the machine room, freezers, cold chambers and partially refrigerated access ways are monitored. In supermarkets, staff rooms are also monitored
when these come into contact with the coolant lines.
1.3 System description
Method of measurement:
CO
2
is detected using an infra-red measurement system in the sensor unit.
System structure:
As a base system, the CO2 CONTROL basic package consists of a sensor unit, a warning unit and a distributor. Where multiple spaces are at risk, the system can
be expanded to include a second sensor unit.
Optionally, the system can also be expanded to up to 2 devices (any combination of signal units / switching units).
Caution! Observe the instructions in the manual!
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kundo xT CO2 Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kundo xT CO2 Control in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Kundo xT CO2 Control

Kundo xT CO2 Control Usermanual and installation guide - German - 54 pages

Kundo xT CO2 Control Usermanual and installation guide - German - 53 pages

Kundo xT CO2 Control Usermanual and installation guide - Dutch - 52 pages

Kundo xT CO2 Control Usermanual and installation guide - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info