649278

Kuchenprofi Profi 10 6568 00 00 - roast thermometer Manual

10
Zoom out
Zoom in
Previous page
1/28
Next page
• Not all degrees of doneness will be available, depending upon the type
of meat selected (for example, poultry should always be consumed well
done). TIP: If you want another degree of doneness than the preset one,
you can change the core temperature manually. (seeManual temperature
adjustment)
• The corresponding core temperature “TARGET TEMP” is shown in the
centre of the display. The factory temperatures are reference values.
• Now, insert the point of the metal probe halfway into the thickest part of
the meat. However, ensure that the point is not inserted too close to
bones, cartilage, or very fatty areas so that the results are not skewed.
• Carefully close the door of the oven on the cable of the probe and place
the base on your countertop.
• CAUTION: Always ensure that the cable or the base station do not come
into contact with the heating coil of the oven, any hot burners,
and/or hot pots!
• The currently measured temperature “CURRENT TEMP” appears in the
centre of the display.
• As soon as the desired core temperature “TARGET TEMP” has been
reached inside the meat, an alarm signal sounds. The alarm signal can
be turned off by pressing any button.
Manual temperature adjustment
• Depending upon the type of meat, the corresponding core temperatures
are preset. However, these can also be changed manually.
• Keep the “MODE” button pressed for 3 seconds. An acoustic signal
sounds and the “TARGET TEMP” display blinks.
• The “MIN” button increases the desired core temperature, the “SEC”
button decreases it.
• Press the “MODE” button again to confirm your selection.
• The currently measured temperature “CURRENT TEMP” appears in the
centre of the display.
• As soon as the desired core temperature “TARGET TEMP” has been
reached inside the meat, an alarm signal sounds. The alarm signal can
be turned off by pressing any button.
Timer function / stopwatch
• The maximum duration for the timer function and for the stopwatch is
99 minutes and 59 seconds.
• The timer function can be used independently from the thermometer
function.
10
GB
BA Bratenthermometer 10 6568 00 00_Layout 1 10.05.10 12:53 Seite 10
… 10 …


Need help? Post your question in this forum.

Forumrules
1

Forum

kuchenprofi-profi-10-6568-00-00----roast-thermometer

Reset search

  • The thermometer is not displaying food temperature
    Submitted on 19-3-2023 at 10:59

    Reply Report abuse

  • My thermometer is not displaying the food temperature Submitted on 7-6-2020 at 05:29

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kuchenprofi Profi 10 6568 00 00 - roast thermometer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kuchenprofi Profi 10 6568 00 00 - roast thermometer in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info