639542
39
Zoom out
Zoom in
Previous page
1/78
Next page
OPERATING THE MOWER24
BPTO Lever
To engage mower blades, push the PTO lever to the
"ENGAGED" position. To stop the mower blades, pull the
PTO lever to the "DISENGAGED" position.
A When attempting to operate the machine in reverse
with the PTO engaged, the engine will shut down.
A If you dismount from the seat while the PTO is running,
the engine will stop automatically. (Operator Presence
Control)
A Before starting the engine, pull the PTO lever to the
"DISENGAGED" position and depress brake pedal,
otherwise, the starter will not operate.
A For best cut quality and performance, always mow
with the throttle lever in "FAST" position.
Use the speed control pedal to select the desired mowing
speed range.
1. Control ground speed by using the speed control
pedal of the machine.
A Keep the mower deck in the fully raised position when
the mower is not engaged.
BKRA system Override Mode
To avoid serious injury:
A Before and when backing, look down and
behind the machine to be sure no bystanders,
especially children, have entered the area.
A K.R.A. System override switch allows the operator to
mow or operate attachments while in reverse if the
operator deems it absolutely necessary and safe to do
so. (i.e. the operator should make sure that no
bystanders, especially children, have entered the
area.)
If the owner does not wish certain operators to utilize
the override switch allowing mowing or implement
operation in reverse, then he or she may remove the
fuse from the system to prevent override. (See NOTE
(4) below)
1. Start the engine.
2. Set the throttle to the "FAST" position.
3. Push the PTO lever to the "ENGAGED" position.
4. Stop the machine (Set the speed control pedal to
NEUTRAL) or depress the speed control pedal
forward.
5. Push the K.R.A. System override switch.
6. Look down and behind the machine to be sure that no
bystanders, especially children have entered the area.
7. Depress the speed control pedal with the heel of your
right foot to move in the reverse direction.
(1) PTO lever : "ENGAGE"
: "DISENGAGE"
(1) During heavy duty use, operate the machine at a
slower ground speed or go over the area twice.
The first pass should be with the deck at the highest
cutting position, then mow to desired height.
(2) The mower will not cut cleanly if the ground speed is
too high or if the blade speed drops due to an
overload.
(1) K.R.A. System switch
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota T2380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota T2380 in the language / languages: English as an attachment in your email.

The manual is 5,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info