639542
21
Zoom out
Zoom in
Previous page
1/78
Next page
MOWER MOUNTING6
[Belt support bracket attaching and adjustment]
Adjust the belt support bracket to the following
specification with the PTO lever in the "ENGAGED"
position and tighten the belt support bracket.
To avoid serious injury:
A Make sure engine is not running.
5. Remove the mower brake wire clamped under the
step.
6. After passing the mower brake wire through the wire
holder, attach it to the mower brake with the rue ring
cotter pin.
7. The mower brake is a safety device to stop the blades.
When the PTO lever is in the "DISENGAGED"
position, the brake is applied to the pulley groove and
the blade stops turning within 5 seconds. With the PTO
lever at the "ENGAGED" position, the brake is off the
pulley groove and the pulley is allowed to turn.
(1) Belt support bracket (A) Clearance between belt support
bracket and pulley. 1 to 2 mm
(3/64" to 5/64")
(B) Clearance between belt support
bracket and belt. 6 to 7 mm
(15/64" to 9/32")
(1) Mower brake wire
(2) Clamp
(1) Mower brake
(2) Wire holder
(3) Mower brake wire
(4) Rue ring cotter pin
(A) PTO lever "ENGAGED"
(B) PTO lever "DISENGAGED"
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota T2380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota T2380 in the language / languages: English as an attachment in your email.

The manual is 5,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info