Manual Kubota M7040 (page 32 of 37) (English)

639489

Zoom out

Zoom in

1/37

TIRES, WHEELS AND BALLAST18

BRear Wheels

Rear tread width can be adjusted as shown with the

standard equipped tires.

To change the tread width

1. Remove the wheel rim and / or disk mounting bolts.

2. Change the position of the rim and / or disk (right and

left) to the desired position, and tighten the bolts.

A Always attach wheels as shown in the drawing.

A If not attached as illustrated, transmission parts may

be damaged.

A When re-fitting or adjusting a wheel, tighten the bolts

to the following torques then recheck after driving the

tractor 200m (200 yards) and thereafter according to

service interval.

(See "MAINTENANCE" section.)

N-m (kgf-m)

(1) (2)

M6040, M7040 260 to 304 (26.5 to 31.0)

260 to 304

(26.5 to 31.0)

M8540, M9540 343 to 402 (35.0 to 41.0)

How do you change rear light signal fixture on a m7040 Submitted on 30-8-2022 at 16:23
Reply Report abuse
How do you change light fixture on rear left signal fixture? Submitted on 30-8-2022 at 16:20
Reply Report abuse
I have a 7040 loader won’t curl up and when it does it’s slow and control s is very loose Submitted on 25-7-2022 at 23:08
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Kubota M7040 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Kubota M7040 Manual

Product: