639487
133
Zoom out
Zoom in
Previous page
1/143
Next page
105REMOVING THE LOADER
10.Start the engine and run at idle. Slowly move the
loader control lever to rollback position to raise the
loader side frames up and out of the receivers of the
main frames as shown.
11.Stop the engine.
12.Slowly release all hydraulic pressure by moving the
loader control lever in all directions.
13.Disconnect the 4 hoses with quick couplers at the
control valve and place them on the right side of the
boom.
14.Place the protective caps and plugs on the quick
coupler ends.
15.Start the engine and slowly back the tractor away from
the loader.
STORAGE OF THE LOADER
1. Store the loader in a clean dry place.
2. Make sure the loader is properly supported.
3. Attach the protective plugs and caps to the couplers to
protect from dust.
4. Check hydraulic hoses and connections. Repair or
replace if necessary.
5. Repair or replace any worm, damaged or missing
parts.
6. Lubricate loader as described "LUBRICATION" in
"MAINTENANCE OF THE LOADER" section.
7. Apply a coat of grease to all exposed cylinder rods and
mounting pins to prevent rust.
8. Repaint worn or scratched parts.
(1) Loader control lever
(1) Protective plug
133


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota LA240A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota LA240A in the language / languages: English as an attachment in your email.

The manual is 8,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info