639487
127
Zoom out
Zoom in
Previous page
1/143
Next page
99MAINTENANCE OF THE LOADER
DAILY CHECKS
1. Check all hardware daily before operation.
Tighten hardware to torque values as specified in the
"Tightening Torque Chart".
2. With the engine off and the bucket on the ground,
inspect all hoses for cuts or wear. Check for signs of
leaks and make sure all fittings are tight.
To avoid serious personal injury:
A Escaping hydraulic fluid under pressure can
have sufficient force to penetrate skin, causing
serious personal injury. Before disconnecting
lines, be sure to relieve all pressure.
Before applying pressure to system, be sure all
connections are tight and that lines, tubes, and
hoses are not damaged.
Fluid escaping from a very small hole can be
almost invisible. Use a piece of cardboard or
wood, rather than hands, to search for
suspected leaks.
If injured by escaping fluid, see a doctor at
once. Serious infection or allergic reaction will
develop if proper medical treatment is not
administered immediately.
A When removing the engine side covers, be
careful not to touch hot loader cylinders.
Allow all surfaces to cool before performing
maintenance.
EVERY 50 HOURS
BChecking main frame bolt and nut torque
To avoid personal injury:
A Never operate front loader with a loose main
frame.
A Any time bolts and nuts are loosened, retighten
to specified torque.
A Check all bolts and nuts frequently and keep
them tight.
Check main frame bolts and nuts regularly especially
when new. If they are loose, tighten them as follows.
(1) Hydraulic line
(2) Cardboard
(3) Magnifying glass
(1) Tightening torque : 147 N-m (15.0 kgf-m)
127


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota LA240A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota LA240A in the language / languages: English as an attachment in your email.

The manual is 8,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info