639487
18
Zoom out
Zoom in
Previous page
1/143
Next page
SAFE OPERATION-8
18.Be extra careful when operating the tractor on a slope,
always operate up and down, never across the slope.
Do not operate on steep slopes or unstable surfaces.
19.When operating another implement on a hillside, be
sure to remove the loader to reduce the risk of rollover.
20.Carry loader boom at a low position during transport.
(You should be able to see over the bucket.)
21.Allow for the loader length when making turns.
1. When loader work is complete and parking or storing,
choose flat and hard ground. Lower the loader boom
to the ground, stop the engine, set the brakes and
remove the key before leaving the tractor seat.
2. Make sure the detached loader is on stands and on a
hard, level surface.
3. Before disconnecting hydraulic lines, relieve all
hydraulic pressure by moving the controls.
4. Do not remove the loader from the tractor without an
approved bucket attached.
1. Always wear safety goggles when servicing or
repairing the machine.
2. Do not modify the loader. Unauthorized modification
may affect the function of the loader, which may result
in personal injury.
3. Do not use the loader as a work platform or a jack to
support the tractor for servicing or maintenance.
Securely support the tractor or any machine elements
with stands or suitable blocking before working
underneath.
For your safety, do not work under any hydraulically
supported devices. They can settle or suddenly leak
down or be accidentally lowered.
4. Escaping hydraulic oil under pressure can have
sufficient force to penetrate the skin, causing serious
personal injury. Do not use hands to search for
suspected leaks. If injured by escaping fluid, obtain
medical treatment immediately.
5. Do not tamper with the relief valve setting. The relief
valve is pre-set at the factory. Changing the setting
can cause overloading of the loader and tractor which
may result in serious personal injury.
6. When servicing or replacing pins in cylinder ends,
bucket, etc., always use a brass drift and hammer.
Failure to do so could result in injury from flying metal
fragments.
3. AFTER OPERATING THE LOADER
4. SERVICING THE LOADER
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota LA240A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota LA240A in the language / languages: English as an attachment in your email.

The manual is 8,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info