635791
91
Zoom out
Zoom in
Previous page
1/98
Next page
71LONG STORAGE
Periodic replacement of important component parts
To ensure safety in operation, you are strongly requested to inspect and service the machine at regular intervals. For added
safety, ask your KUBOTA dealer to replace the following important component parts.
These parts are prone to degradation in material or subject to wear and tear with time. It is difficult to judge how much they
have been affected at regular inspection. It is therefore necessary to replace them with new ones, whether wear is visible
or not after a specified time of use.
If any of them is found to be worn before the specified use, they must be repaired or replaced the same as other parts.
If any of the hose clamps are found deformed or cracked, the hose clamps must also be replaced.
For the hydraulic hoses other than the ones to be replaced periodically, inspect them for the following points. If found loose
or very worn, tighten and / or replace the hose.
When replacing the hydraulic hoses, change their O rings and sealing components with new ones.
For replacement of the important parts, contact your KUBOTA dealer.
A At the following periodic inspections, check the fuel hoses and hydraulic hoses as well.
List of important component parts
To prevent serious damage to the hydraulic system, use only a KUBOTA genuine hydraulic hose.
Inspection Interval Check points
Daily Checks Oil leak at fuel and hydraulic hose connections and points
Every month
Oil leak at fuel and hydraulic hose connections and points
Damages at fuel and hydraulic hose (cracks, chafing)
Every year
Oil leak at fuel and hydraulic hose connections and points
Interference, deformation, degradation, twist and other damages (cracks, chafing) of fuel and hydraulic
hoses
No. Component parts Used place Q'ty Period
1 Fuel hose
Fuel tank - Fuel filter 1
Every 2 years or
4000 hours
Fuel filter - Fuel pump 1
Fuel pump - Fuel nozzle 1
Fuel nozzle - Fuel tank 2
2 Hydraulic hose (suction)
Tank - Pipe 1
Pipe - Main pump 1
3 Hydraulic hose (delivery)
Main pump - Control valve 3
Main pump - Pilot filter 1
Pilot filter - Change valve 1
4 Hydraulic hose (Boom cylinder)
Control valve - Adapter 2
Adapter - Boom cylinder 2
5 Hydraulic hose (Arm cylinder)
Control valve - Pipe, Boom 2
Pipe, Boom - Arm cylinder 2
6 Hydraulic hose (Bucket cylinder)
Control valve - Pipe, Boom 2
Pipe, Boom - Bucket cylinder 2
7 Hydraulic hose (Swing cylinder) Control valve - Swing cylinder 2
8 Hydraulic hose (Dozer cylinder)
Control valve - Rotary joint 2
Rotary joint - Pipe 2
Pipe - Dozer cylinder 2
9 Hydraulic hose (Service port)
Control valve - Pipe, Boom 2
Pipe, Boom - Pipe, Boom 2
Pipe, Boom - Pipe, Arm 2
10 Hydraulic hose (Swivel motor) Control valve - Swivel motor 2
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota KX91-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota KX91-3 in the language / languages: English as an attachment in your email.

The manual is 11,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info