635791
71
Zoom out
Zoom in
Previous page
1/98
Next page
51REGULAR CHECKS AND MAINTENANCE WORK
BGreasing Swing Bearing Teeth
1. Pump grease with grease gun through the grease
nipple (at the right end side).
2. Grease at each 90 (1.58 rad.) position of the swing
frame.
3. Fill with approx. 50g of grease (approx. 20 to 30
pumps with the grease gun at each position).
EVERY 200 SERVICE HOURS
Do all 50-hour servicing at the same time.
BChecking Fan Belt Tension
C Check and adjustment of the fan belt tension
To avoid personal injury:
A First stop the engine and remove the key.
A After servicing, make sure to replace the belt
cover in its original position.
1. Press the fan belt down in the middle, with a force of
approx. 7 kg. The belt tension is correct if it deflects
about 8 mm. If otherwise, loosen bolt (1) shift the
alternator (2) in the direction shown by the arrow.
2. Replace the fan belt if worn out, cracked or torn.
A If the engine is run with a loose fan belt, the belt could
slip and cause overheating of the engine or insufficient
battery charging. Check fan belt tension regularly.
A Should the fan belt break or jump off, the indicator light
for battery charge will light up. Stop the engine and
remove the key immediately.
BChecking Radiator Hoses and Clamps
To avoid personal injury:
A Wait long enough for the radiator coolant to
cool down.
Check the water hoses for proper connection. This check
should be carried out every 200 hours or every 6 months,
whichever comes first.
1. Should the hose clamps become loose or water leaks,
tighten the hose clamps properly.
2. Should the radiator hoses become swollen, aged or
cracked, they must be replaced and the hose clamps
tightened again properly.
(1) Grease nipple
(1) Bolt
(2) Alternator
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota KX91-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota KX91-3 in the language / languages: English as an attachment in your email.

The manual is 11,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info