635791
66
Zoom out
Zoom in
Previous page
1/98
Next page
MAINTENANCE46
A See "Opening and Closing of the Fuel Tank Cap" and
"LCD Display for Normal Operation."
BChecking Engine Oil Level
To avoid personal injury:
A Stop the engine and remove the key before
checking the oil level.
Insert the engine oil dipstick fully into the respective port
opening, remove again and check the oil level; if
necessary fill with oil. The machine must be on level
ground when checking the oil level.
A Use engine oil with the correct viscosity. (according
the outside temperature.)
A After stopping the engine and removing the key, wait
five minutes and then check oil level. The excavator
must be on level ground.
BChecking Hydraulic Oil Level
To avoid personal injury:
A Stop the engine and remove the key before
checking the oil level.
A Before filling oil, wipe away all sand and dust from
around the oil port. Make sure to use an identical type
of hydraulic fluid.
A The excavator has been filled with hydraulic fluid
before delivery. See "RECOMMENDED OILS".
(Do not mix different oils.)
1. Park the excavator on a firm, flat and level surface.
Lower the attachments and dozer blade to the ground
and stop the engine.
2. Check the oil level as to whether it lies on the center of
the gauge at normal temperature (10 to 30 (50 to
80 )).
3. Enough oil is present if the oil level lies near the center
of the gauge.
4. Should the oil level be too low, fill oil through the oil
port before starting the engine. This step is important
for the protection of the hydraulic system.
(1) Fuel tank cap
(1) Engine oil dipstick
(2) Filling port
(A) Oil level is acceptable
within this range.
(1) Tank cap (2) Gauge
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota KX91-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota KX91-3 in the language / languages: English as an attachment in your email.

The manual is 11,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info