635791
56
Zoom out
Zoom in
Previous page
1/98
Next page
36 TRANSPORTING THE EXCAVATOR ON A VEHICLE
TRANSPORTING THE EXCAVATOR ON A VEHICLE
To avoid personal injury or death:
A No directional changes should be made when
the excavator is on the ramp. Should a change
of direction be necessary, drive off the ramp
completely and make the turn.
A When driving forwards or backwards onto the
vehicle, or when swinging the upper body,
make sure that neither the CAB or the gates of
the vehicle will be damaged.
A When the excavator reaches the point between
the ramps and the bed, halt and then move very
slowly until the excavator reaches the
horizontal position.
A Move the excavator onto the vehicle only with
the arm completely pulled in. Otherwise the
CAB of the vehicle could be damaged when
swinging around the upper body.
A Do not jack up the machine using its boom to
load or unload the excavator from the vehicle.
Doing this is dangerous.
A Make sure the ramp are of sufficient capacity
and securely connected to the vehicle to safety
support the machine throughout the loading /
unloading operation.
B Transporting on a truck
To avoid personal injury or death:
A After loading the machine on the truck, lower
the bucket and dozer onto the truck bed. Lock
the swing frame with the swing lock pin.
Prepare a platform to load or unload the excavator.
Take following steps when using ramps.
1. Apply the parking brakes of the vehicle, and block the
drive wheels from both sides.
2. Use mounting brackets secure the ramp properly.
Connect the ramps directly to the bed.
3. For additional safety, use blocks or supports under the
ramps and the bed.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota KX91-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota KX91-3 in the language / languages: English as an attachment in your email.

The manual is 11,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info