635791
32
Zoom out
Zoom in
Previous page
1/98
Next page
OPERATION OF THE ENGINE12
BCharge Lamp
This warning lamp lights up if the charging system fails
while the engine is running. When the starter switch is
turned "ON" with the engine off, the lamp lights up, and
when the engine gets started, the lamp goes out.
A If there is disconnection or failure in the charging
system when the key is turned to "RUN", the following
symbol will appear.
BOil Lamp
The engine oil pressure warning lamp lights up due to
failure of the lubricating system with the engine running.
When the starter switch is turned "ON" with the engine
off, this lamp lights up, and when the engine starts, the
lamp goes out. If the lamp stays on with the engine
running, stop the engine and check the engine oil level.
A If there is disconnection, failure or breakdown in the
lubricating system when the key is turned to "RUN",
the following symbol will appear.
BGlow Lamp
With the starter key at the "RUN" position, the engine's
preheat status is indicated.
A When the starter switch is turned to the "RUN"
position, the engine will be preheated for a given
period of time and the lamp will turn on.
A The above indication appears momentarily when the
engine is started, but it does not mean any trouble.
(This is because the oil charge sensor output becomes
unstable when the engine is started.)
A The symbol appears momentarily as the engine
starts. This is not an error.
BLCD Display for Normal Operation
C Fuel gauge
To avoid personal injury:
A Before adding fuel, be sure to stop the engine.
A Be sure to keep open flame away from the
machine. Otherwise a fire may be caused.
With the starter key at the "RUN" position, the fuel
remaining in the fuel tank is indicated in the block.
A If the fuel gauge indicator is near the "E" or the "FUEL"
message appears, add fuel as soon as possible. If the
indicator is near "E" and the machine runs on a slope,
the engine may run out of fuel and get interrupted.
C Fuel supply
The following functions are helpful when adding the fuel.
The fueling progress can be monitored by a buzzer sound.
Procedure
1. Press the work light switch or the display selector
switch on the meter with the key OFF. (Keep the key
at OFF.)
2. The message shown above appears.
3. Add fuel.
4. The buzzer sound interval changes according to the
amount fuel added. As the fuel amount becomes close
to full, the buzzer sound changes to continuous
beeping.
(1) Fuel gauge (A) "Empty"
(B) "Full"
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota KX91-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota KX91-3 in the language / languages: English as an attachment in your email.

The manual is 11,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info