639486
140
Zoom out
Zoom in
Previous page
1/143
Next page
REINSTALLING THE BACKHOE112
9. Move the tractor backward until the support hooks on
the tractor main frame are just beneath the mount bars
on the backhoe main frame.
10.Lower the mount bars onto the support hooks by
operating the stabilizer and boom control levers.
11.Move the boom slowly to the lowering position, and
engage the guide plates of the main frame to the
bosses of sub frame. Then raise the rear wheels
slightly by operating the boom to the lowering
direction.
To avoid serious injury or death:
A Make sure pins are in all the way slide bar
secured and backhoe securely attached.
12.Shut off the engine. Reinstall the mounting pins, and
insert the slide bars of the mounting pins to the lower
hole of the main frame.
A If the slide bar of the mounting pins is inserted to the
upper hole, the mounting pin comes off and the
backhoe might come off. Therefore, please make sure
to insert the slide bar to the lower hole.
A Move the tractor / loader / backhoe to an open area
and cycle all backhoe functions. This will check their
operation and flow oil back through the system,
filtering it and refilling each circuit. Check the hydraulic
oil level before putting the backhoe into full operation.
See "MAINTENANCE OF THE TRACTOR" section for
oil type and correct level.
(1) Guide stop
(2) Mount bar
(3) Support hook
(1) Mounting pin
(2) Slide bar
140


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota BX25DLB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota BX25DLB in the language / languages: English as an attachment in your email.

The manual is 8,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info