639486
137
Zoom out
Zoom in
Previous page
1/143
Next page
109REMOVING THE BACKHOE
6. Slowly raise the boom to disengage the backhoe from
the tractor.
7. Raise the backhoe by operating the stabilizers to the
lowering direction until the mount bars hit to the guide
stopper on the support hooks.
8. Move the tractor forward from the backhoe about 203
mm.
A Be careful not to damage or break the hoses when
moving the tractor.
9. Lower the main frame and swing frame onto the
ground by operating the boom and stabilizer control
levers.
10.Shut off the engine and set the parking brake.
11.Slowly release all hydraulic pressure by moving the
backhoe hydraulic control levers in all directions.
12.Disconnect hydraulic hoses in the following manner:
(1) Disconnect the inlet, outlet and power beyond
hoses from the tractor.
(2) Connect tractor's outlet hose to the coupler of
power beyond pipe.
13.Restart the engine.
Then drive the tractor / loader slowly away from the
backhoe.
14.Shut the engine off and remove the key from the
tractor. Set the parking brake.
A The entire 3-point hitch can now be reinstalled on the
tractor for use with other rear mount implements.
A Be sure that there is sufficient ballast in the rear tires
and an implement is attached to the 3-point hitch
before using the loader with backhoe removed.
(1) Guide stopper
(2) Mount bar
(3) Support hook
(1) Main frame
(2) Swing frame
(1) Outlet hose (tractor)
(2) Power beyond pipe (tractor)
(A) To be connected
137


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota BX25DLB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota BX25DLB in the language / languages: English as an attachment in your email.

The manual is 8,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info