639486
126
Zoom out
Zoom in
Previous page
1/143
Next page
98 MAINTENANCE OF THE LOADER
MAINTENANCE OF THE LOADER
To avoid personal injury:
A Be sure to check and service the tractor on a
flat surface with the bucket on the ground,
engine shut off, the key removed and the
parking brake on.
LUBRICATION
1. Lubricate all grease fittings every 10 hours of
operation. Also, lubricate joints of control lever linkage
every 10 hours. High quality grease designating
"extreme pressure" and containing Molybdenum
disulfide is recommended. This grease may specify
"Moly EP" on its label.
2. Daily before operation, check the tractor hydraulic fluid
level. If low, add as described in "PERIODIC
SERVICE OF THE TRACTOR" section. Also change
the filter element and the hydraulic fluid as
recommended in "PERIODIC SERVICE OF THE
TRACTOR" section.
RE-TIGHTENING OF HARDWARE
After 20 to 30 hours of initial loader operation, re-tighten
all mounting bolts and nuts to the required torque value as
specified in the "Tightening Torque Chart".
BTightening Bolts and Nuts
Tighten all bolts and nuts with required torque.
A Before finally tightening all mounting hardware, start
the engine and apply down pressure to the bucket until
the loader raises the front wheels slightly, and make
sure that the mounting pins can be rotated easily.
Tighten all bolts and nuts in this position.
Location Bolt / Nut Required Torque
Main frame
M14
bolts or nuts
147 N-m
(15.0 kgf-m)
126


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota BX25DLB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota BX25DLB in the language / languages: English as an attachment in your email.

The manual is 8,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info