639500
439
Zoom out
Zoom in
Previous page
1/448
Next page
BX25, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601,
WSM
BACKHOE
(8)---~+-
3TVAAACNP048B
(7)
(8) (9) (10)
(11
)(12) (13)
&
L R
Dipperstick
Cylinder, Boom,
Boom
Cylinder
and Hoses
1.
Disconnect the hydraulic hoses
and
remove the dipperstick
cylinder (4).
2.
Remove the pins (1), (3)
and
remove the boom cylinder (2).
3.
Remove the pin (6)
and
remove the boom (5).
4.
Remove the hydraulic hoses from the control valve.
(When reassembling)
Lock the locking nuts to setting bolts at position where the
mounting bolt may still
be
rotated .
Connect the hydraulic hoses at their original positions
and
be
sure to connect the hose angle
as
indicated table below.
Port Angle
of
Bent Tube
T,P
L 1.57
rad
(L 90
0)
A6, B6 R 1.83
rad
(R
105°)
P.B.
R 2.09 rad (R 120
0)
Ai,
A2, B1,
B2
R 0.17
rad
(R
10°)
(Reference)
Color of type
Port
Color
Ai,
B1
Red
A2,B2
Orange
A3, B3 Green
A4.B4
White
A5.B5
Yellow
NOTE
P
port
is
short
hose
without
sleeve.
T
port
is
long
hose
with
sleeve.
(1)
Pin
(30 x 142 mm)
(2) Boom Cylinder
(3)
Pin
(30 x 169 mm)
(4) Dipperstick Cylinder
(5) Boom
(6)
Pin
(1.18 x 7.96 in.)
(7) T Port (Tank)
(8)
A1
Port (Rod Side of Bucket
Cylinder)
(9) A2 Port (Rod Side of Dipperstick
Cylinder)
(10) A3 Port (Bottom Side of Stabilizer
Cylinder RH)
(11)
A4 Port (Bottom Side
of
Stabilizer
Cylinder LH)
(12) A5 Port (Bottom Side
of
Boom
Cylinder)
(13) A6 Port (Rod Side of Swing
Cylinder)
(14)
P.B.
Port (Power Beyond)
(15) B6 Port (Bottom Side of Swing
Cylinder)
(16) B5 Port (Rod Side of Boom
Cylinder)
(17) B4 Port (Rod Side
of
Stabilizer
Cylinder LH)
(18) B3 Port (Rod Side of Stabilizer
Cylinder RH)
(19) B2 Port (Bottom Side
of
Dipperstick
Cylinder)
(20) B4 Port (Bottom Side of Bucket
Cylinder)
(21) P Port (Pump)
a:
Bottom
Side
of
Bucket
Cylinder
b:
Bottom
Side
of
Dipperstick
Cylinder
c:
Rod Side
of
Boom
Cylinder
d;
Rod Side
of
Bucket
Cylinder
e:
Rod Side
of
Dlpperstick
Cylinder
f:
Bottom
Side
of
Boom
Cylinder
L:
Installation Angle
R:
Installation
Angle
439


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kubota BX25 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kubota BX25 in the language / languages: English as an attachment in your email.

The manual is 20,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info